Siemens Gigaset S685 IP User Manual page 41

Network services
Functions during a call
Precondition: Your phone will permit two
parallel VoIP connections (see
on page 117).
call only
Consultation call
During a call:
Press the display key.
§Ext.Call§
~ c
Enter the number or copy
from the directory and briefly
press/press and hold the
talk key c.
The number must be dialled via VoIP.
.
Please note:
After a few seconds, the number selected for a
consultation call is saved in the last number
redial list.
If the participant answers, you have the
following options:
u
Toggling:
¤
Use q to toggle between the par-
ticipants.
¤
End call with active participant:
End Active
§Options§
u
Conference call:
¤
Call both participants: press the dis-
play key .
§Conf.§
¤
End the conference call (toggling):
press display key
¤
End call with both participants:
press the end call key a.
u
Forwarding (provider dependent):
Precondition: You are toggling calls
and you phoned the currently active
participant yourself.
¤
To connect the two external partici-
pants:
Call Transfer
§Options§
If call forwarding was successful, a
message will appear to this effect. The
handset will then switch to idle.
40
Allow 1 VoIP
Call.
.
§EndConf§
Accepting a waiting call
Precondition: Call waiting is activated
(page 39).
Press the display key.
§Accept§
You have the option of toggling or holding
a conference call.
Please note:
– If the first call was an internal call, the inter-
nal connection is ended.
– An internal call waiting is shown on the dis-
play. You can neither accept the internal
call nor reject it.