Siemens Gigaset S685 IP User Manual page 15

First steps
Follow the steps in the order given below:
1. Connect the phone cord and power
lead to the base station.
2. Connect the base station to the fixed
line network and the mains power sup-
ply.
3. To connect the base station to the Inter-
net, first connect the base station to
the router (connection via router and
modem or via router with integrated
modem).
4. Connect the PC and router (optional) -
for advanced configuration of the base
station (see page 104).
1. Connect the phone cord and power
lead to the base station
2
1
1. Insert the phone cord into the lower
connection socket at the rear of the
base station.
2. Insert the power lead of the mains
adapter into the upper connection
socket at the rear of the base station.
3. Push both cables into the appropriate
cable channels.
14
2. Connect the base station to the fixed
line network and the mains power
supply
2
1. Insert the phone cord into the fixed line
network connection socket.
2. Then insert the mains adapter into the
mains socket.
Please note:
u
Keep the mains adapter plugged in at
all times for operation, as the phone
does not work without mains connec-
tion.
u
3
Only use the mains adapter and phone
cord supplied.
u
If you buy a replacement phone cord
from a retailer, pay attention to the wir-
ing of the phone jack.
Correct phone jack assignment
3
2
1
You can now use your phone to make calls
via the fixed line network and can be
reached on your fixed line number.
Your answer machine is set with a default
announcement in answer and record mode
(page 61).
1
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused