Opening Web Pages - Siemens Gigaset S685 IP User Manual

Navigation area
In the navigation area, the functions of the
menu selected in the menu bar
(page 106) are listed.
If you click a function, the associated page
opens in the working area with informa-
tion and/or fields for your inputs.
If a function is assigned subfunctions,
these are displayed with the function as
soon as you click the function. The rele-
vant page for the first subfunction is dis-
played in the working area.
Working area
Depending on the function selected, infor-
mation or dialogue boxes are displayed in
the working area, which allow you to
make or change your phone settings.
Making changes
Make settings for entry fields, lists or
options.
u
There may be restrictions regarding the
possible values for a field, e.g. entering
special characters or certain value
ranges.
u
To open a list, click
between default values.
u
There are two kinds of options:
– Options in a list, from which you can
activate one or several options.
Active, i.e. selected options are high-
lighted with
with . You can activate an option
by clicking . The status of the
other options in the list does not
change. You can deactivate an
option by clicking
– Alternative options. The active
option in the list is highlighted with
, and the non-active with
You can activate an option by click-
ing . The previously activated
option is deactivated. You can only
deactivate an option by activating
another option.
. You can choose
, non-active options
.
.
Web configurator –configuring phone via PC
Applying changes
As soon as you have made your change on
a page, activate the new setting on the
phone by clicking Set.
If your input in a field does not comply
with the rules for this field, an appropriate
error message will be displayed. You can
then repeat the input.
Warning:
Changes that have not been saved on your
phone are lost if you move to another Web
page or if the Web configurator is terminated,
e.g. due to the time limit (page 105).
Buttons
Buttons are displayed in the bottom sec-
tion of the working area.
Set
Save entries on the phone.
Cancel
Reject changes made on the Web page
and reload the settings that are cur-
rently saved in your phone to the Web
page.

Opening Web pages

A brief outline of the navigation to the
individual Web configurator functions is
given below.
Example:
Setting DTMF signalling
¢
Settings Telephony
To open the Web page, carry out the fol-
lowing steps after registration:
¤
Click the
Settings
bar.
¤
Click the Telephony
gation area.
The subfunctions of
played in the navigation tree.
¤
Click the
Advanced Settings
The Web page from Figure 2 will be shown
in the Web browser.
¢
Advanced Settings
menu in the menu
function in the navi-
Telephony are dis-
subfunction.
107