First Steps; Pack Contents; Setting Up The Handset For Use - Siemens Gigaset S685 IP User Manual

First steps

First steps

Pack contents

The pack contains:
u
one Gigaset S685/S675 IP base station
u
one Gigaset S67H/S68H handset
u
one mains adapter for the base station
u
one charging cradle incl. mains adapter
u
one phone cable
u
one Ethernet cable (LAN cable)
u
two batteries
u
one battery cover
u
one belt clip
u
one quick guide
Firmware updates:
Your telephone is supplied with the firmware
version 097 or higher.
Whenever there are new or improved func-
tions for your Gigaset IP phone, base station
firmware updates will be made available for
you to download to your telephone (page 98).
If this results in operational changes to your
phone, a new version of this user guide will be
published on the Internet at
www.siemens.com/gigaset

Setting up the handset for use

The display is protected by a
plastic film. Please remove
the protective film!
Inserting the batteries
Warning:
Only use rechargeable batteries (page 145)
recommended by Siemens Home and Office
Communication Devices GmbH & Co. KG.
Never use a conventional (non-rechargeable)
battery or other battery types as this could
result in significant health risks and personal
injury. For example, the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
10
¤
Insert the batteries the right way round
(see figure).
The polarity is indicated in/on the battery
compartment.
The handset switches on automatically.
You will hear a confirmation tone.
Closing the battery cover
¤
First, align the notches on the side of
the battery cover with the protrusions
on the inside of the housing.
¤
Then press the cover until it clicks into
place.
Opening the battery cover
¤
If fitted, remove the belt clip.
¤
Place your fingertip in the cavity on the
casing and pull the battery cover
upwards.