Connecting External Devices; Connecting To The Ac Power - Yamaha MCX-2000 Owner's Manual

Connecting External Devices
Connect all relevant devices ret(:3rrinq to the section
~'Panel
D(:;1scr!ptions
H (pa~Je
7) and trle setup illustrat!on below.
~J1ake
sure each c:evice is turned off
before
rnaking connect1ons.
IN
Audio pin cable (supplied)
'"~._~.~_._----........
Video pin cable
(supplied)
Power cable
~
(should be connected last)
~~!ua a~~"
oullet for US mode!
• The MCX-2000 is designed to connect to a TV monitor for easy operation. Though you can still operate the unit while viewing its front
pane! display: a large TV dispiay offers more operation information at a time.
• The MCX-2000 accepts a generic PS/2 keyboard. This enables faster
l
more convenient operation than the remote control or front-panel
buttons: especially vJhen you edit song information or other text data.
• The MCX-2000 is designed to become active immediately after the power cable is connected to the AC power source. Make sure to
connect to the AC power source only in the last step after all other devices are connected.
Connecting to the AC Power
V\hlen relevant external c:levlces are all connectecL
turn
on these devices first, anci then connect
the
fv1CX
-2000
power
cable to the AC povver source.
AC plug and outfet ftJr US moe/e;
The front panel ST.ANDBY/ON button
~ndicator \N~lI
Hql··lt up
~n ~Jreen.
On the TV rnonitor,
svv~tch
the video input source to
the IviCX-2000 video output (ViDEO
or
S-VIDEO). If the
follovving
screen is shovv'n on tile T\/ display, connection to the T\/
nlonitor has been successfuL
Top menu
~v'](_:X:-2000
Owner's fv1cmuol
13
Connecting External Devices
Connect all relevant devices ret(:3rrinq to the section
~'Panel
D(:;1scr!ptions
H (pa~Je
7) and trle setup illustrat!on below.
~J1ake
sure each c:evice is turned off
before
rnaking connect1ons.
IN
Audio pin cable (supplied)
'"~._~.~_._----........
Video pin cable
(supplied)
Power cable
~
(should be connected last)
~~!ua a~~"
oullet for US mode!
• The MCX-2000 is designed to connect to a TV monitor for easy operation. Though you can still operate the unit while viewing its front
pane! display: a large TV dispiay offers more operation information at a time.
• The MCX-2000 accepts a generic PS/2 keyboard. This enables faster
l
more convenient operation than the remote control or front-panel
buttons: especially vJhen you edit song information or other text data.
• The MCX-2000 is designed to become active immediately after the power cable is connected to the AC power source. Make sure to
connect to the AC power source only in the last step after all other devices are connected.
Connecting to the AC Power
V\hlen relevant external c:levlces are all connectecL
turn
on these devices first, anci then connect
the
fv1CX
-2000
power
cable to the AC povver source.
AC plug and outfet ftJr US moe/e;
The front panel ST.ANDBY/ON button
~ndicator \N~lI
Hql··lt up
~n ~Jreen.
On the TV rnonitor,
svv~tch
the video input source to
the IviCX-2000 video output (ViDEO
or
S-VIDEO). If the
follovving
screen is shovv'n on tile T\/ display, connection to the T\/
nlonitor has been successfuL
Top menu
~v'](_:X:-2000
Owner's fv1cmuol
13