Using the tone controls
The tone controls on the MusicCAST client allow
you to alter the nature of the sound being output.
You can change these settings to give a strong deep
bass, or a lighter treble to the sound.
• Altering the tone settings
1.
Press and hold MENU for two seconds
to return to the Top Menu screen.
'lJl"Pla
l
::l
r.:~I:aca
11 P1"::1
1
:1
Ed i
t.
Book
f'"lar"k
Set.lJp
Inptrt
2.
Use
A
I v
to move the cursor to "Tone"
and press SELECT.
The Tone screen appears on the display.
3.
Use
A
I
v to move the cursor to the
desired parameter and press SELECT.
Treble:
Increase the setting of this parameter
to increase the amount of treble in
the sound output by the MusicCAST
client.
Bass:
Increase the setting of this parameter
to increase the amount of bass in the
sound output by the MusicCAST
client.
MusicCAST settin s
The relevant menu appears on the display:
4.
Use> or
A
to increase the value of the
setting, and
<
or
v
to decrease the value
of the setting.
S.
Press SELECT or MENU to confirm the
value you have set and return to the
Tone screen.
•
Using the tone controls
The tone controls on the MusicCAST client allow
you to alter the nature of the sound being output.
You can change these settings to give a strong deep
bass, or a lighter treble to the sound.
• Altering the tone settings
1.
Press and hold MENU for two seconds
to return to the Top Menu screen.
'lJl"Pla
l
::l
r.:~I:aca
11 P1"::1
1
:1
Ed i
t.
Book
f'"lar"k
Set.lJp
Inptrt
2.
Use
A
I v
to move the cursor to "Tone"
and press SELECT.
The Tone screen appears on the display.
3.
Use
A
I
v to move the cursor to the
desired parameter and press SELECT.
Treble:
Increase the setting of this parameter
to increase the amount of treble in
the sound output by the MusicCAST
client.
Bass:
Increase the setting of this parameter
to increase the amount of bass in the
sound output by the MusicCAST
client.
MusicCAST settin s
The relevant menu appears on the display:
4.
Use> or
A
to increase the value of the
setting, and
<
or
v
to decrease the value
of the setting.
S.
Press SELECT or MENU to confirm the
value you have set and return to the
Tone screen.
•