Yamaha MCX-2000 Owner's Manual page 120

Digital audio server
Hide thumbs Also See for MCX-2000:
Table of Contents

Advertisement

GAUTION: READ THIS BEFORE OPERATING THIS UNIT
• T'o assure the finest performance, please read this manual carefully.
Keep it in a safe place fell' fhtul'e reference.
• Install this unit in a \vell vcntilated. cool. dry, clean place .---- avvay fi'om
direct sunlight, heat sources. vibration. dust.
moi~tul'e.
and/or cold.
Avoid
ventilation space
of at
least
30 em
on
the top,
20
crn
on
the len
and right. and
10
cm on the back
of
this unit.
• Locate this unit mvay from other electrical appliances, motors. or
transf()rmel's to aVt)id humming
~ounds.
• Do not expose this unit to sudden tcmperature changes from cold to
hot. and do not locate this unit in a environment \vith high humidity
(i.e. a r00111 \vith a humidi11er) to pn.:'\'ent condensation inside this unit,
which may cause an electrical shock, fire. damage to this unit, and/or
personal injury.
.. Avoid installing this unit \vhel'e f()reign
ol~ject
may fall onto this unit
and/or this unit may be exposed to liquid dripping or splashing. On the
top of this
unit~
do NOT place:
• Other cOlHponents, as they
may
cause damage and/or discoloration on
the
sHrf~)Ce
0
f
this unit.
• Burning objects Ii.e. candies). as they may cause fire.
dmnag(~
to this
unit. und/or personal injury.
It
Containers \vith liquid in them. . as they rnay fall and liquid may
electrical sht)C'k to the user and/or damage to this unit.
• Do not cover the rear pane!
of
this unit with a nevvspapec. tabledoth,
curtain. etc. in order not to obstruct heat radiation. if the temperature
inside this unit rises, it may cause fire. darnage to this unit, an<Vor
personal injury.
• Do not plug in this unit
to a
wall outlet until
all
connections are
complete.
• Do
not operate this unit upside-down.
It
lnay overheat. . possibly causing
damage.
• Do not use force on switches. knobs and/or cords.
• \Vhen disconnecting the pov/er cable from the wall outlet. . grasp the
plug: do not pull the cord.
• Do not dean this unit \'vith chemical solvents; this rrlight damage the
finish. Use a clean. dry cloth.
• Only voltage specified on this unit must be used. Using this unit with a
higher voltage than specified is dangerous and may cause
fire~
damage
to this unit. and/or personal injury.
YArv1AHA
will not be held
responsible for any damage resulting from use of this unit with a
voltage other than specified.
• To prevent damage by lightning) keep the po\ver cord and outdoor
antennas disconnected from a wall outlet or the unit dUling a lightning
storm.
• Do not attempt to 11lOdif)l or tlx this unit. Contact qualified
'YAiV1AHA
service personnel when any service is needed. The cabinet should never
be opened for any reasons.
• \Vhen not planning to use this unit
t~1r
long periods of time (i.e.
vacation). disconnect the AC pov·,ier plug from the \,vall outlet.
• Be sure to read the ;'TROUBLESHOOTING" section on common
operating elTors before concluding that this unit is faulty.
db
Before moving this unit. first check that there is no disc in the disc tray.
Finally. press STANDBY/ON to tun1 oiTthis unit. and disconnect the
AC power plug hom thewaii outlet.
It
Install this unit ncar the .AC outlet and "vhere the AC po\ver plug can be
reached easily.
4
MCX-2DDC Setup Guide
This unit is not disconnected from the
AC
power source as h)ng as it is
connected to the waH outlet, even if this unit itselfis turned
niT. In
this
state. this unit is designed to consume a 'very small quantity
of
powcr.
Laser cornponent in this product is capable of emitting radiation
exceeding
the
limit
tCH'
Class
t.
IMPORTANT!
Please record the serial number of this unit in the space below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Ovvl.ler's rvlanual in
a
safe phKe H.w future reference.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT
Thc wires in this mains lead
are
coloures in accordance with the
following code:
GRFEN-and-YEIJ.
.J)\V:
Earth
BLUE:
Neutral
BROVv'N:
Live
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identitying the terminals
in your plug proceed as follows: The \vire which is coloured GREEN-
and-
YELLO\V
lYwst be connected to the tenninal in the plug which is
marked by the letter E or by the safety earth symbol
*
or coloured
CiREEN
or GREEN-and
-YELLO\V.
'fhe wire \vhich is coloured
BLUE
must
be connected to the tenninal which is marked \vlth the
letter N or coloured BLACK. 'fhe \vire which is coloured BRO\VN
must be connected to
thl~
terminal which is marked with the letter L
or coloured RED.
For U.K. customers
fr
the socket outlets in the home are not suitable for the plug supplied
with this appliance,it should be
cut off
and
an
appropriate 3 pin plug
fitted. For details, refer
to
the instructions described above.
Note: The plug severed from the mains lead must be destroyed. as a plug
\vith bared flexible cord is hazardous if engaged in a live socket outlet.
For Canadian Customers
To prevent electric shock. match wide blade of plug to \vide slot and
fully insert.
This Class B digital apparatus
compli(~s
\vith Canadian
lCE5-003.
Do not remove the connector of built-in antenna from the
\'1CX-2000.
GAUTION: READ THIS BEFORE OPERATING THIS UNIT
• T'o assure the finest performance, please read this manual carefully.
Keep it in a safe place fell' fhtul'e reference.
• Install this unit in a \vell vcntilated. cool. dry, clean place .---- avvay fi'om
direct sunlight, heat sources. vibration. dust.
moi~tul'e.
and/or cold.
Avoid
ventilation space
of at
least
30 em
on
the top,
20
crn
on
the len
and right. and
10
cm on the back
of
this unit.
• Locate this unit mvay from other electrical appliances, motors. or
transf()rmel's to aVt)id humming
~ounds.
• Do not expose this unit to sudden tcmperature changes from cold to
hot. and do not locate this unit in a environment \vith high humidity
(i.e. a r00111 \vith a humidi11er) to pn.:'\'ent condensation inside this unit,
which may cause an electrical shock, fire. damage to this unit, and/or
personal injury.
.. Avoid installing this unit \vhel'e f()reign
ol~ject
may fall onto this unit
and/or this unit may be exposed to liquid dripping or splashing. On the
top of this
unit~
do NOT place:
• Other cOlHponents, as they
may
cause damage and/or discoloration on
the
sHrf~)Ce
0
f
this unit.
• Burning objects Ii.e. candies). as they may cause fire.
dmnag(~
to this
unit. und/or personal injury.
It
Containers \vith liquid in them. . as they rnay fall and liquid may
electrical sht)C'k to the user and/or damage to this unit.
• Do not cover the rear pane!
of
this unit with a nevvspapec. tabledoth,
curtain. etc. in order not to obstruct heat radiation. if the temperature
inside this unit rises, it may cause fire. darnage to this unit, an<Vor
personal injury.
• Do not plug in this unit
to a
wall outlet until
all
connections are
complete.
• Do
not operate this unit upside-down.
It
lnay overheat. . possibly causing
damage.
• Do not use force on switches. knobs and/or cords.
• \Vhen disconnecting the pov/er cable from the wall outlet. . grasp the
plug: do not pull the cord.
• Do not dean this unit \'vith chemical solvents; this rrlight damage the
finish. Use a clean. dry cloth.
• Only voltage specified on this unit must be used. Using this unit with a
higher voltage than specified is dangerous and may cause
fire~
damage
to this unit. and/or personal injury.
YArv1AHA
will not be held
responsible for any damage resulting from use of this unit with a
voltage other than specified.
• To prevent damage by lightning) keep the po\ver cord and outdoor
antennas disconnected from a wall outlet or the unit dUling a lightning
storm.
• Do not attempt to 11lOdif)l or tlx this unit. Contact qualified
'YAiV1AHA
service personnel when any service is needed. The cabinet should never
be opened for any reasons.
• \Vhen not planning to use this unit
t~1r
long periods of time (i.e.
vacation). disconnect the AC pov·,ier plug from the \,vall outlet.
• Be sure to read the ;'TROUBLESHOOTING" section on common
operating elTors before concluding that this unit is faulty.
db
Before moving this unit. first check that there is no disc in the disc tray.
Finally. press STANDBY/ON to tun1 oiTthis unit. and disconnect the
AC power plug hom thewaii outlet.
It
Install this unit ncar the .AC outlet and "vhere the AC po\ver plug can be
reached easily.
4
MCX-2DDC Setup Guide
This unit is not disconnected from the
AC
power source as h)ng as it is
connected to the waH outlet, even if this unit itselfis turned
niT. In
this
state. this unit is designed to consume a 'very small quantity
of
powcr.
Laser cornponent in this product is capable of emitting radiation
exceeding
the
limit
tCH'
Class
t.
IMPORTANT!
Please record the serial number of this unit in the space below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Ovvl.ler's rvlanual in
a
safe phKe H.w future reference.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT
Thc wires in this mains lead
are
coloures in accordance with the
following code:
GRFEN-and-YEIJ.
.J)\V:
Earth
BLUE:
Neutral
BROVv'N:
Live
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identitying the terminals
in your plug proceed as follows: The \vire which is coloured GREEN-
and-
YELLO\V
lYwst be connected to the tenninal in the plug which is
marked by the letter E or by the safety earth symbol
*
or coloured
CiREEN
or GREEN-and
-YELLO\V.
'fhe wire \vhich is coloured
BLUE
must
be connected to the tenninal which is marked \vlth the
letter N or coloured BLACK. 'fhe \vire which is coloured BRO\VN
must be connected to
thl~
terminal which is marked with the letter L
or coloured RED.
For U.K. customers
fr
the socket outlets in the home are not suitable for the plug supplied
with this appliance,it should be
cut off
and
an
appropriate 3 pin plug
fitted. For details, refer
to
the instructions described above.
Note: The plug severed from the mains lead must be destroyed. as a plug
\vith bared flexible cord is hazardous if engaged in a live socket outlet.
For Canadian Customers
To prevent electric shock. match wide blade of plug to \vide slot and
fully insert.
This Class B digital apparatus
compli(~s
\vith Canadian
lCE5-003.
Do not remove the connector of built-in antenna from the
\'1CX-2000.

Advertisement

Table of Contents
loading

Table of Contents