Connecting External Devices; Connecting To The Ac Power - Yamaha MCX-2000 Owner's Manual

MCX2000.book Page 13 Monday, September 12, 2005 11:09 AM

Connecting External Devices

Connect all relevant devices referring to the section "Panel Descriptions" (page 7) and the setup illustration below. Make
sure each device is turned off before making connections.
Video pin cable
(supplied)
VIDEO
IN
• The MCX-2000 is designed to connect to a TV monitor for easy operation. Though you can still operate the unit while viewing its front
panel display, a large TV display offers more operation information at a time.
• The MCX-2000 accepts a generic PS/2 keyboard. This enables faster, more convenient operation than the remote control or front-panel
buttons, especially when you edit song information or other text data.
• The MCX-2000 is designed to become active immediately after the power cable is connected to the AC power source. Make sure to
connect to the AC power source only in the last step after all other devices are connected.

Connecting to the AC Power

When relevant external devices are all connected, turn on these devices first, and then connect the MCX-2000 power
cable to the AC power source.
The front panel STANDBY/ON button indicator will light up in green. On the TV monitor, switch the video input source to
the MCX-2000 video output (VIDEO or S-VIDEO). If the following screen is shown on the TV display, connection to the TV
monitor has been successful.
Initial display
T
FM ANT
MODEL NO. MCX–2000
CAUTION
XM RS– 232 C
RISK OF ELECTRIC SHOCK
DO NOT OPEN
W_LAN ANT
75Ω UNBAL.
MADE IN MALAYSIA
THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR
OUT SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE
IN
YAMAHA CORPORATION 10-1 NAKAZAWA-CHO,
VIDEO L
HAMAMATSU-SHI, SHIZUOKA-KEN, JAPAN
MANUFACTURED BY
YEM (M)
T S
VIDEO MANUFACTURED:
R
IN OUT
®
IN OPTICAL ANALOG
LINK/DATA 10/100
LAN REMOTE AUDIO
VIDEO US
Audio pin cable (supplied)
T WE87930-U-1 T
YAMAHA
MCX–2000
AC IN
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
FCC ID: A6RMCX2000A
OPERATION IS SUBJECT TO THE FOLLOWING T WO CONDITIONS:
( 1 ) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND THE XM NAME AND RELATED LOGOS
( 2 ) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, ARE REGISTERED TRADEMARKSOF
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION
XM SATELLITE RADIO INC.
AC plug and outlet for US model
AC plug and outlet for US model
Top menu
IN
L
R
T
Power cable
(should be connected last)
MCX-2000 Owner's Manual
13