Figure 3.25 Mounting An Interface Board On A Slot; Figure 3.26 Locking The Front Panel Level Of The Interface Board - Samsung OfficeServ 7400 Installation Manual

The Procedure for mounting the interface board to each slot is as follows:
1) Check the exterior of the interface board for any damages.
2) Align each Interface board to the guardrail of the universal slot of the OfficeServ 7400
basic cabinet or expansion cabinet, and slide the Interface board into the slot.
3) Push the front panel lever of the Interface board until the board is completely inserted
into the connector of the OfficeServ 7400 main board.

Figure 3.26 Locking the front Panel Level of the Interface Board

© SAMSUNG Electronics Co., Ltd.

Figure 3.25 Mounting an Interface Board on a Slot

OfficeServ 7400 Installation Manual
3-21