Smartmedia Cards; Input-Output Modem (Iom) Board; Modem Daughter Board; Interface Cards - Samsung OfficeServ 500 General Description Manual

MISCELLANEOUS FUNCTION MODULE (MISC)
The Miscellaneous Function Module (MISC) daughter board installs in position MCP2-D3 on the MCP2 card in a
single cabinet system or in position SCP2-D2 on the SCP2 or position LCP2-D2 on the LCP2 card(s) in a multiple
cabinet system. The MISC daughter board is used to provide external music on hold/audio inputs (radios, digital
announcers, etc.), external paging auto output, loud bell, common bell and programmable dry contact closures.
The system can support up to three of these daughter boards, one on the MCP2 or SCP2 and one on each of the
LCP2s.
The MISC consists of the following:
• Two (2) external music/audio inputs
• One (1) external paging audio output
• One (1) loud bell audio output
• One (1) common bell relay contact closure
• Two (2) software assignable relay contact closures

2.2.3 SMARTMEDIA CARDS

An OfficeServ 500 system must have a SmartMedia card installed in the main control processor (MCP2) as the
SmartMedia card contains the system operating software. The SmartMedia card can also be used to store a back-
up customer database to supplement the database stored on the MCP2 card. In addition the SmartMedia card
can store backup copies of the operating software for the SCP2, LCP2, and TEPRI/TEPRIa cards.
2.2.4 INPUT–OUTPUT MODEM (IOM) BOARD
The Input Output Modem board installs in the first cabinet and provides access to the two serial I/O ports on the
Main Control Processor (MCP2) card. Ports 1 and 4 are not used on a Release 2 system.The IOM board also has pro-
vision to have an internal 56K/V.90 modem installed on it

2.2.5 MODEM DAUGHTER BOARD

The Modem daughter board installs on the Input Output Modem card. The modem provides a 56K/V90 connec-
tion to the system for use for remote administration and/or programming.The card has a default extension num-
ber of 3999 and eliminates the need for an external modem, serial cable, single line telephone port and serial I/O
port on the system.

2.3 INTERFACE CARDS

These cards provide the interface connections for telephone lines and stations to the KSU and expansion cabi-
nets.These cards fit into the universal card slots to configure the system as required. OfficeServ 500 interface cards
are encased in a static dissipative ABS plastic shell to protect the PCB during handling.

2.3.1 TRUNK CARDS

TRUNK B1
This card contains four loop start C.O. line interface circuits with C.O. disconnect detection. It also contains the cir-
cuitry needed for Caller ID. It can be inserted in any universal card slot in all cabinets.
TRUNK C1
This card contains eight loop start C.O. line interface circuits with C.O. disconnect detection. It also contains the
circuitry needed for Caller ID. It can be inserted in any universal card slot in all cabinets.
(see Part 2.2.5).
2.5