CHAPTER 3. Ошибка! Стиль не определен.
3.3.2 Mounting Interface Boards to Slots
Interface boards are mounted on slot1~slot11 of each slot(For the basic cabinet, slot3 is
reserved for MP40 board). The following table describes the slot locations for interface
boards. For the locations of Slot 0 through slot 1, refer to '3.1. Cabinet Configuration'
section of this chapter.
Category
Voice C.O. line
Voice extension
Data voice
application
VMS
Functions and Characteristics of Each Interface
For detail information on functions and characteristics of each Interface board, refer to
'OfficeServ 7400 System Manual'
3-20
Table 3.9 Types of Interface Boards and Slots Available
Interface Board
TEPRI,8TRK,4TRK
TEPRI2
16DLI, 8DLI, 16SLI, 8SLI, 8HYB
16SLI2, 16DLI2, 8HYB2
GWIM,GSIM
LIM, LIM-P, GLIMP
4DSL
4WLI, MGI
MGI64
SVMi-20E
Slots Available
Slot 1, 2, 4~11 of the basic cabinet
Slot 1 to 11 of the expansion cabinet
Slot 1, 2, 4~11 of the basic cabinet
Slot 1 to 11 of the expansion cabinet
(When mounting to the expansion
cabinet, only limited use of 32
channels)
Slot 1, 2, 4~11 of the basic cabinet
Slot 1 to 11 of the expansion cabinet
Slot 1, 2, 4~11 of the basic cabinet
Slot 1 to 11 of the expansion cabinet
Slot 1, 2, 4~11 of the basic cabinet
Slot 1 to 11 of the expansion cabinet
Slot 1, 2, 4~11 of the basic cabinet
Slot 1 to 11 of the expansion cabinet
Slot 1, 2, 4~11 of the basic cabinet
Slot 1 to 11 of the expansion cabinet
Slot 1, 2, 4~11 of the basic cabinet
Slot 1 to 11 of the expansion cabinet
(When mounting to the expansion
cabinet, only limited use of 32
channels)
Slot 1, 2, 4~11 of the basic cabinet
Slot 1 to 11 of the expansion cabinet
© SAMSUNG Electronics Co., Ltd.