Changing The Engine Oil Using An Oil Changer; Changing The Engine Oil By Draining It - Yamaha F200C Service Manual

Changing the engine oil using an oil
changer
1. Start the engine and warm it up.
2. Remove the engine oil dipstick and oil
filler cap 1.
3. Insert the tube of the oil changer 2 into
the dipstick guide 3.
4. Operate the oil changer to extract the oil.
NOTE:
Be sure to clean up any oil spills.
5. Pour the specified amount of the recom-
mended engine oil into the oil filler hole.
Recommended engine oil:
4-stroke motor oil
API: SE, SF, SG, SH, or SJ
SAE: 10W-30 or 10W-40
Oil quantity:
Without oil filter replacement:
5.8 L (6.1 US qt, 5.1 Imp qt)
69J1D11
Fuel system / Power unit
6. Install the oil filler cap and dipstick, and
then start the engine and warm it up for 5
minutes.
7. Turn the engine off, and then check the
oil level and correct it if necessary.
Changing the engine oil by draining
it
1. Start the engine and warm it up.
2. Remove the engine oil dipstick and oil
filler cap 1.
3. Remove the starboard apron 2.
4. Place a drain pan under the drain hole,
and then remove the drain bolt 3 and let
the oil drain completely.
1
2
3
4
5
6
7
S69J3120
8
9
3-6