Yamaha F200C Service Manual page 141

4. Install the camshaft caps, and then
tighten the bolts to the specified torques
in two stages and in the sequence
shown.
5. Install the timing chain tensioners 1, and
then tighten the bolts to the specified
torque in the sequence shown.
69J1D11
NOTE:
• Install the camshaft caps in the proper posi-
tion as shown and with the stamped num-
bers facing upside down.
• Apply engine oil to the camshaft cap bolts
before installation.
Camshaft cap bolt:
1st: 8 N·m (0.8 kgf·m, 5.8 ft·lb)
2nd: 17 N·m (1.7 kgf·m, 12 ft·lb)
Timing chain tensioner bolt:
12 N·m (1.2 kgf·m, 8.7 ft·lb)
6. Install the new gaskets, exhaust covers
and canister bracket, and then tighten
the bolts to the specified torques in two
stages and in the sequence shown.
Exhaust cover bolt:
1st: 6 N·m (0.6 kgf·m, 4.3 ft·lb)
2nd: 12 N·m (1.2 kgf·m, 8.7 ft·lb)
Cylinder head
5-42
1
2
3
4
5
6
7
8
9