Setting Menu - JVC 0210TTH-SW-VP Instructions Manual

Operation and Settings
User Settings Menu
(Cont'd)

(3) Setting Menu

This menu is used for specifying the input level of the terminal and the display mode.
indicates the factory default.
Item
Input Level
Display Mode
Input Level
Main
0-255(PC)
Image
Setting
Display Mode
Convergence
1
Lens
Option
Single
Setting Value
0-255(PC) For specifying the input level of the video signals.
16-235
Single For specifying the display mode of the projection screen.
Double
Cross
NOTE:
● Please refer to Connecting Video Signals of the Computer for
16-235
1 2
1 3
3 4
Double Cross
0-255(PC) : Set to this value under normal circumstances.
(Signal level 0 to 255)
16-235 : For specifying when the signal level is between 16
and 235.
Single : Displays input signals on a single screen.
Double : Displays two different input signals on two screens.
The left screen displays images of the DVI 1 terminal,
and the right screen displays images of the DVI 3
terminal.
Cross : Displays four different input signals on four screens.
The top left screen displays images of the DVI 1
terminal, the top right screen displays images of the DVI
2 terminal, the bottom left screen displays images of the
DVI 3 terminal, while the bottom right screen displays
images of the DVI 4 terminal.
details. (A Page 20 to 23)
host PJ-1
user: root
Logout
Description