Table of Contents
Advertisement
indicates the factory default.
Item
Setting Value
Power
ON
OFF
^
Warning Status
Lamp Mode
^
Lamp Information
For turning on/off the lamp selected in Lamp Mode .
ON
OFF
NOTE:
● The following operating modes of the projector are displayed to the
right of the OFF button.
STANDBY
PROJECTION
FAN ENABLE
LAMP ENABLE
DEVICE ENABLE
COOLING
EMERGENCY
EMERGENCY COOLING : Error Occurred (Cooling performed)
● When in the standby mode, clicking the ON button each time
switches the mode in the sequence of STANDBY DEVICE
ENABLE LAMP ENABLE FAN ENABLE PROJECTION.
● Clicking the OFF button when the power is on switches the projector
to the cooling mode. The power of the projector cannot be turned on
during the cooling process (180 seconds).
Displays the latest error number.
NOTE:
● For details on the error code and description, please refer to
Warning Status . (A Page 55)
● None is displayed when no error is detected.
Both
For selecting the lamp to turn on during power on.
Lamp1
Both
Lamp2
Lamp1
Auto
Lamp2
Auto
NOTE:
● This setting is only available in the STANDBY , COOLING ,
EMERGENCY and EMERGENCY COOLING operating modes.
For displaying the information on Lamp 1 and 2.
Status
ON
OFF
Failed
Time
Description
: Turns on the lamp.
: Turns off the lamp.
: Standby (OFF)
: Lamp Illuminated (ON)
: FAN Enable (OFF ON)
: LAMP Enable (OFF ON)
: Elemental Device Enable (OFF ON)
: Cooling (OFF)
: Error Occurred (Cooling not performed)
: Selects both lamps.
: Selects only Lamp 1.
: Selects only Lamp 2.
: Selects only the lamp with the least lamp time.
However, Lamp1 is selected when both lamps have
the same lamp time.
: Lamp illuminated
: Lamp off
: The lamp fails to light up even though the operation of
illuminating the lamp is performed.
Lamp time (in minutes)
Advertisement
Table of Contents
