Trunk Line Capacity; Station (Subscriber) Line Capacity; Electrical Specifications; Signal Specifications - Samsung OfficeServ 7200 General Description Manual

CHAPTER 3. OfficeServ 7200 Specifications
1.1

Trunk Line Capacity

The maximum trunk line capacity of the OfficeServ 7200 is based on its configuration
and is shown in Table 3.2.
System Configuration
Basic chassis
Basic chassis + expansion
chassis
1.2

Station (Subscriber) Line Capacity

The maximum station line capacity for analogue phones and digital phones in the
OfficeServ 7200 is based on its configuration and is shown in Table 3.3.
System Configuration
Basic chassis
Basic chassis + expansion
chassis
2

Electrical Specifications

2.1

Signal Specifications

The signal processing protocol is used for interfacing messages between the trunk
lines/stations and the system. Also, the signal processing protocol refers to the
method for providing status information.
Page 3-2

Table 3.2 Trunk Line Capacity

Analogue
LOOP TRK BRI
40 40
80 80

Table 3.3 Station Line Capacity

Analogue phones
80
160
OfficeServ 7200 General Description Guide
Digital
T1 TRK E1 TRK
72 90
96 120
Digital Phones
80 (DS-5012L : 24)
160 (DS-5012L : 48)
© Samsung Business Communications
PRI TRK
T1 : 72
E1 : 90
T1 : 96
E1 : 120