Chassis Configuration - Samsung OfficeServ 7200 General Description Manual

CHAPTER 2. OfficeServ 7200 Hardware
Maintenance
The OfficeServ 7200 hardware is designed to be maintained with ease and safety.
The 19-inch rack is designed to maintain sufficient strength.
The installing/maintenance technician can connect cables easily using external
ports on the front panel.
The front of each module has an LED that indicates failure and operational
status so that system failures are easily identified.
The back of the rack has a ground hole to which a wrist strap for preventing
static electricity can be connected.
The OfficeServ 7200 hardware is designed to prevent electronic devices from
being damaged while installation or maintenance is being carried out.
Fire Resistance and Heat Processing
The OfficeServ 7200 hardware is made of fire-resistant materials and components.
The OfficeServ 7200 hardware is designed not to affect system performance due to
heat generated from inside of the system.
Heat generated by a component is blocked in order not to affect temperature-
sensitive components.
Two 80 mm fans for cooling are installed.
Components installed in the modules are located based on heat distribution.
2

Chassis Configuration

The OfficeServ 7200 consists of two chassis (a basic and an expansion chassis)
mounted on a 19-inch rack and a feature server that operates externally. The MCP,
the main control processor, is installed in the basic chassis and manages the entire
system, performing switching and signal processing, and managing subscriber ter-
minals. The LCP, the minor control processor, is installed in the expansion chassis
and controls the line module and sends/receives information to/from the MCP. The
chassis also include line modules, power, and cooling fans.
Page 2-2
OfficeServ 7200 General Description Guide
© Samsung Business Communications