CHAPTER 2. OfficeServ 7200 Hardware
3.5.2 4WLI
The 4WLI interface module uses the DASL to send/receive voice to/from the phone
system and wireless base station. This module decompresses the voice of the G.711
and uses the wireless method of 802.11b WLAN or DECT. The 4WLI accommodates
four base stations and one base station can accommodate four channels. One WLI
platform interfaces the DECT with the WLAN by software conversion to work with
the wireless base station.
Major Functions
The major functions of the 4WLI voice application module are as follows:
Voice decompression: G.711
Wireless specification: 802.11b WLAN
Specifications
The specifications of the 4WLI module are as follows:
Up to four base stations.
Simultaneous calling through up to four channels per base station.
Maximum of 48 mobile station subscribers supported.
Front View
The components on the front panel of the 4WLI have the following functions:
Ports & LEDs
P1~P4
SIO
RUN LED
SW1~SW3 LED
Page 2-24
P1
P2
P3
Figure 2.17 Front View of the 4WLI
Table 2.18 Ports and LEDs of the 4WLI
Port for connecting the WBS24 base station.
UART port (for tests).
This LED turns on when the wireless LAN operates.
This LED turns on when the software task operates.
OfficeServ 7200 General Description Guide
P4
SIO
Function
© Samsung Business Communications
RUN
SW1 SW2 SW3
4WLI