Panasonic KX-TD1232 Program Manual page 370

General Programming
Area Bit
10 1-8 Sends a dial tone to the extension when
a CO button or the line access
(Automatic or Outside Line Group)
code is pressed. This programming
allows each outside line group (TRG) to
work as follows.
Bit 1-TRG 1, Bit 2-TRG 2, Bit 3-TRG 3,
Bit 4-TRG 4, Bit 5-TRG 5, Bit 6-TRG 6,
Bit 7-TRG 7, Bit 8-TRG 8
10, 9 Unused
11 Enables or disables sending a doorphone
access tone to a monitored doorphone. If
disabled, the access tone is not heard
from the doorphone when monitoring
starts.
12 Selects how long the system keeps the
door opener ulnlocked.
14, 13 Unused
15 Selects to show the incoming call
display (CLIP) or the number/name of
the original extension when transferring
an incoming outside call to an extension
(Call Transfer, Screened - to Extension).
16 Unused
Selection
• Area code: 01 through 10
• Selection: See "Selection" shown in the lists for each area.
Default
See "Default" shown in the lists.
Programming
1.
Enter 990.
Display: 990 SYS ADD DATA
2.
Press NEXT.
Display: Area NO?
3. Enter an area code.
370
Explanation
Description Selection Default
0 : send
1 : not send
0 : disable
1 : enable
0 : 3 s
1 : 5 s
0 : original
extension
number/name
1 : CLIP
References
1 T1 Line
1 Doorphone Call
1 Door Opener
1 Call Transfer
Programming Guide