General Programming
[312] ARS Mode
Description
Allows you to turn on or off the Automatic Route Selection (ARS) mode. ARS, if enabled,
selects the least expensive route to be used for an outside call.
Selection
On / Off
Default
Off
Programming
1.
Enter 312.
Display: 312 ARS MODE SET
2.
Press NEXT.
Display example: ARS:Off
3.
Press SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
• If "Off" is selected, the Automatic Line Access feature functions instead of ARS.
• Programs [313] through [331] are used to program ARS.
Features Guide References
Automatic Route Selection (ARS)
Line Access, Automatic
152
Programming Guide