Programming Methods - Panasonic KX-TD1232 Program Manual

1.3 Programming Methods

Advancing to the next stage
When "SYS-PGM NO?
• To go to program [000], press the NEXT button.
• To go to another program, enter the 3-digit program address.
Rotation of jack number
Each jack of the Digital Super Hybrid System supports the connection of a digital proprietary
telephone and a single line device with different extension numbers (eXtra Device Port: XDP
function). To program this function it is necessary to assign two parts for each jack. The first
part of jack one is 01-1. The second part of jack one is 01-2. The first part of jack two is 02-1
and so on. The NEXT and PREV buttons can be used to move from jack to jack as required
in programs [003], [004] and [601] through [610].
Example
NEXT
#01-1
PREV
Note
The first part of a jack is for a DPT of a XDP-assigned jack. The second part is for a single line
device. Program [600] "EXtra Device Port" assigns which jacks are XDP.
Storing your data
Press STORE to store your data.
• The STORE indicator lights red and a confirmation tone is emitted.
* Confirmation tone (one beep)
After pressing STORE, you will hear a beep. This informs you that storage is completed.
* Alarm tone (three beeps)
If you hear this alarm, your entry is not valid.
Making another selection within the same program address
• To make the next higher selection, press NEXT.
• To make the previous selection, press PREV.
• To make a specific selection, press SELECT and then enter the number.
Programming Guide
" is displayed, you can select one of the following:
NEXT
#01-2 #02-1
PREV
General Programming Instructions
NEXT
#02-2......
PREV
15