Extension Clip Number Assignment - Panasonic KX-TD1232 Program Manual

[622] Extension CLIP Number Assignment

Description
Assigns the identification number of the calling party to each extension in order to utilize the
Calling Line Identification Presentation (CLIP) feature provided by the ISDN line service.
This program is only available for the KX-TD1232 with the Primary Rate Interface ISDN
Expansion Unit (KX-TD290).
Selection
• Jack number:
KX-TD1232 — 01 through 64,
( =all jacks, -1 = first part, -2 = second part)
• CLIP number: 16 digits (max.)
Default
All jacks-1/2 — Not stored
Programming
1.
Enter 622.
Display: 622 EXT CLIP NO
2.
Press NEXT.
Display: Jack NO?
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack number.
Display example: #01-1:Not Stored
4.
Enter the CLIP number.
To change the current entry, enter the new number.
5.
Press STORE.
6.
To program another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• Each number has a maximum of 16 digits, consisting of 0 through 9.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
Programming Guide
(-1 / -2),
General Programming
293