• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available. Jack numbers in the out-of-service system are
unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number" in Section
1.3 Programming Methods.
• To assign all jacks to one COS, press the
contents programmed for Jack 01.
•
Program [017] DISA User Codes is also used to assign a Class of Service to a DISA
*1
(Direct Inward System Access) User Code.
Features Guide References
Class of Service (COS)
Available for the KX-TD1232 only.
*1
Programming Guide
key in step 3. In this case, the display shows the
General Programming
271