Table of Contents
Advertisement
After checking the startup of the UPS in step ④, turn ON the power of the load
devices.
*2
Notes on UPS startup
*1. If the "CONTROL NG" is displayed, the UPS cannot be started because, for example, there is an input
power supply error. Check the status of "STATUS" in the home menu of the LCD panel and see §11.
"Troubleshooting."
*2. Load capacity
If "OVER LOAD" is displayed on the LCD screen and a beep-beep-beep-beep beep-beep-beep-beep
buzzer sound can be heard when the power of the load devices is turned ON, the load devices
connected to the UPS exceed the rated capacity of the UPS. Reduce the number of connected load
devices.
Operating Procedures
28
Advertisement
Table of Contents
