Table of Contents
Advertisement
§
5
.
4
E
x
t
e
r
n
a
l
I
5
.
4
E
x
t
e
r
n
a
l
I
⑤
②
①
⑥
No.
Name
Connect the connector and a computer with the supplied communication cable.
PC I/F
①
This interface functions as follows depending on the setting of "Interface" in the LCD panel
setting menu.
PC interface
Select the interface according to the function to be used. For the setting procedure, see §3.5
connector (RS-232C)
"Setting PC Interface" in
CARD I/F
②
Connect the connection cable of an optional Sanyo LAN interface card.
When connecting a LAN interface card, set the interface to
Card interface
connector
interface setting procedure, see §3.5 "Setting PC Interface" in the
Manual
For the LAN interface card installation, see the manual attached in the LAN interface card.
n
t
e
r
f
a
c
e
s
n
t
e
r
f
a
c
e
s
④
③
the LCD Panel Operating Manual
1. Interface setting:
WS (work station) (default setting)
Use software such as the power management software on the supplied CD-ROM to
manage the power and shut down the computer by performing communication
between the UPS and computer (personal computer, work station, etc.).
For details on the power management software, see §12 "Using Power Management
Software" or the User's Guide on the supplied CD-ROM.
2. Interface setting:
Standalone
Use the standard UPS service function* of the operating system (NetWare, Windows
NT, etc.) to shut down the UPS automatically.
* Notes on using the UPS service function
For details on the setting procedure, see
When using an operating system (Windows 95 and 98, etc.) that does not have a UPS service
function, do not connect the supplied communication cable. The backup operation may not be
possible in the event of a power outage.
When using a combination of the UPS service function and the power management software
(option) with a serial connection, set the interface to
when the setting is set to standalone, the UPS may shut down suddenly when there is a power
Signal Names
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
.
Note
The PC interface connector and
card interface connector cannot be
used at the same time.
Function
.
(standalone)
§
13 "Using Standard OS UPS Service."
WS
(work station). If the UPS is used
External Appearance
D-sub 9-pin Male
⑤
④
③
②
①
WS
Part Names
⑨
⑧
⑦
⑥
Fixing Screw
(inch)
(work station). For the
LCD Panel Operating
12
Advertisement
Table of Contents
