Table of Contents
Advertisement
Installation and Wiring
§
6
.
2
A
t
t
6
.
2
A
t
t
① Prepare the LCD panel, LCD panel connection cable, and two screws C for securing the LCD panel (only
when securing the LCD panel), that are supplied with the UPS.
LCD Panel
② Loosen the screws in two places on the left and right of the front panel, and then remove the front panel
from the UPS.
③ Remove the logo plate from the front panel.
② Use a screwdriver to loosen
the screws in two places on
the left and right, and then
remove the front panel.
④ Attach the LCD panel to the front panel.
The LCD panel is secured by magnets, but also secure it with the screws C in two places if there is the
risk of it falling off.
When Mounting Horizontally
From the back side of the front
panel, secure two places at the
back of the LCD panel with
screws C.
④ Insert the connector parts on
the back of the LCD into the
holes on the front panel.
17
a
c
h
i
n
g
L
C
D
P
a
a
c
h
i
n
g
L
C
D
P
a
LCD Panel Connection Cable
1
n
e
l
n
e
l
1
From the back side of the
front panel, secure two
places at the back of the
LCD panel with screws C.
Screw C: For securing LCD panel
M3×6
2
③ Pinch the tabs on the back
toward the top and bottom,
and remove the logo plate.
When Mounting Vertically
④ Insert the connector parts on
the back of the LCD panel into
the holes on the front panel.
Advertisement
Table of Contents
