Commissioning And Configuration; Overview; Using The Internal Dhcp Server - ABB ACH550 Installation Manual

Commissioning and configuration

Overview

The RBIP-01 BACnet/IP Router Module provides an internal web
server functionality. The web server is used, for example, for
commissioning the module and configuring the BACnet/IP
settings.
To access the internal web server, you need an IP/web-based
connection between the module and your PC.

Using the internal DHCP server

Dynamic Host Configuration Protocol (DHCP) is an IP service
assigning an IP address to clients upon request. If your PC runs
as a DHCP client (a typical setting), you can use the internal
DHCP server of the router module.
1. Press and hold the Reset switch of the router module down for
more than 5 seconds but no longer than 10 seconds. As soon
as the STATUS LED flashes green and red alternating, the
DHCP server is active.
2. Connect the crossover cable to your PC and the IP address is
automatically assigned.
Crossover cable
Commissioning and configuration
31