Operation And Reset Of The Module; Operation; Resetting The Module - ABB ACH550 Installation Manual

Operation and reset of the module

Operation

After installation and applying power, the RBIP-01 BACnet/IP
Router Module directly starts operation. The device is designed for
permanent full-time operation, so no additional power switch
needs to be activated.
If you need to disconnect the router module from the power
supply, remove the green power connector.

Resetting the module

Function
Reset
DHCP
The module has an internal
Reset switch.
The switch offers the following
functions:
Description
To reset the device, press and release the
Reset switch.
For example, if you wish to deactivate the
DHCP server after you have activated it,
perform a reset.
To activate the DHCP server, press and hold
down the Reset switch for more than 5 seconds
but no longer than 10 seconds.
Operation and reset of the module
27