Disa (Direct Inward System Access) - Panasonic KX-TAW848 Feature Manual

1.4 D
In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI destination,
if assigned. If not assigned, the call is routed to the Direct In Line (DIL) destination, extension 101.
In lunch mode: CLI distribution is disabled. The call is routed to the DIL destination, extension 100.
Note
Tenant numbers and VPS trunk group numbers (not shown here) can also be programmed in the DIL
Table.
The tenant number programmed here is used only to determine the Time Table used by each CO line;
selecting tenant 3 means the CO line will use Time Table 3, for example. The VPS trunk group number
set here is used to determine the Incoming Call Service and greeting message used by the Voice
Processing System (VPS) during the current time mode. (→ 1.19.4 Voice Mail DPT (Digital)
Integration).
Conditions
• To use this feature, DIL must be assigned as the distribution method for the desired CO line port.
Programming References
PC Programming Manual
2.15.2 [9-2] DIL Table & Port Settings—DIL
→ DIL Destination—Day, Lunch, Break, Night
→ Tenant Number
→ VM Trunk Group
PT Programming Manual
[450] DIL 1:1 Destination
Feature Manual References
1.3.10 CLI (Calling Line Identification) Distribution
1.9.8 INCOMING CALL FEATURES
1.17.4 Time Service
1.4.6

DISA (Direct Inward System Access)

Description
An outside caller can access specific PBX features as if the caller is an SLT extension user in the PBX, when
the incoming call destination is a DISA floating extension number assigned to each DISA message. The
caller can have direct access to features such as:
• Placing an intercom call to an extension, operator or any floating extensions (e.g., modem for
remote system administration, an external pager for TAFAS).
• Calling an outside party via the PBX.
• Operating some PBX remote features (e.g., FWD)
58 Feature Manual