Panasonic KX-TAW848 Feature Manual page 31

Hold
Flashing the
hookswitch
Mode 3
Hold Feature No.
Going on-hook
Flashing the
hookswitch
Mode 4
Hold Feature No.
Going on-hook
*: These operations must be performed when the held call is intended to be retrieved from another
extension using the holding extension number.
If one of the following occurs frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode 4":
a)
When an SLT user answers a call, a reorder tone is heard or no one is heard on the other end.
b)
When an SLT user goes off-hook, a reorder tone is heard instead of a dial tone.
If a call is not terminated after going on-hook, the above cases occur. To avoid these problems, choose
"Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless the Hold feature number is
entered after flashing the hookswitch in Mode 2, Mode 3, and Mode 4.
• Hold Alarm tone pattern has a default. (→ 2.2 Tones/Ring Tones)
Programming References
PC Programming Manual
2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→ Recall—Hold Recall
→ Recall—Disconnect after Recall
2.8.8 [2-6-1] Numbering Plan—Main—Features
→ Call Hold / Call Hold Retrieve
→ Call Hold Retrieve : Specified with a Holding Extension Number
→ Hold Retrieve : Specified with a Held CO Line Number
2.8.17 [2-9] System Options
→ Option 1—PT Operation—Automatic Hold by ICM / CO / ICD Group key
→ Option 1—PT Operation— Hold Key Mode
→ Option 5—SLT—SLT Hold Mode
PT Programming Manual
[200] Hold Recall Time
Hold
(to be Retrieved from
Another Extension)
Flashing the hookswitch
Hold Feature No.
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
Hold Feature No.
+
Hold Feature No.
+
Going on-hook
Transfer to CO Line
*
Flashing the
hookswitch
+
Hold Feature No.
+
CO Line Access No.
+
Flashing the
hookswitch
+
Hold Feature No.
+
CO Line Access No.
+
Transfer to
Extension
Flashing the
hookswitch
+ +
Extension No.
+
Flashing the
hookswitch
+ +
Hold Feature No.
+ +
Extension No.
Feature Manual
1.3 C
31