Panasonic KX-TAW848 Feature Manual page 190

1.16 S
• The first digit of the Walking COS feature number must be entered before the greeting message finishes
playing.
• When accessing SVM from a CO line, it is possible to change message boxes (e.g., to leave a message
in another user's message box after listening to one's own messages). However, a user can only access
the message boxes of other extensions assigned to the same SVM card. For example, if the user
accesses a message box belonging to SVM card 1 first, then the user can only access the message
boxes of other extensions belonging to SVM card 1. If the user tries to access the message box of
another extension belonging to a different card, the user will hear a reorder tone.
While a reorder tone is heard, it is possible to retry another call by pressing " ".
Installation Manual References
2.5.4 SVM2 Card (KX-TDA5192)
Programming References
PC Programming Manual
2.4.2 Tool—Simplified Voice Message—Delete All Recordings
2.4.3 Tool—Simplified Voice Message—Check Current Usage
2.8.4 [2-3] Timers & Counters—Miscellaneous
→ SVM—Recording Time
→ SVM—Dial Tone Continuous Time
2.8.8 [2-6-1] Numbering Plan—Main—Features—Simplified Voice Message Access
2.9.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection
→ Simplified Voice Message Tone Detection—Silence
→ Simplified Voice Message Tone Detection—Continuous
→ Simplified Voice Message Tone Detection—Cyclic
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 6—Display Lock / SVM Lock
2.10.7 [4-1-6] Wired Extension—Simplified Voice Message
2.10.8 [4-2-1] Portable Station—Extension Settings—Option 6—SVM Lock
2.10.12 [4-2-4] Portable Station—Simplified Voice Message
2.11.3 [5-3-1] Voice Message—DISA System
→ Recording Mode
→ Remote Access
2.11.5 [5-3-3] Voice Message—SVM
PT Programming Manual
None
Feature Manual References
1.4.3 Dial Tone
1.20.1 Walking COS
2.1 Capacity of System Resources
Operating Manual References
1.3.47 SVM (Simplified Voice Message)
190 Feature Manual