Panasonic KX-TAW848 Feature Manual page 180

1.16 S
Caller's identification
Secret dialing
Date order
Received call
Answered call
Timed Reminder call
Printing Message
Time format
Conditions
• SMDR Format
The following SMDR format parameters can be set through system programming in order to match the
paper size being used by the printer:
a)
Page Length: determines the number of lines per page.
→ 2.16.1 [10-1] Main—SMDR—SMDR Format—Page Length (Number of Lines)
→ [802] SMDR Page Length
b)
Skip Perforation: determines the number of lines to be skipped at the end of every page.
→ 2.16.1 [10-1] Main—SMDR—SMDR Format—Blank Footer Length (Number of Lines)
→ [803] SMDR Skip Perforation
The page length should be at least four lines longer than the skip perforation length.
180 Feature Manual
Item
Controls whether the caller's identification number, name, number
and name, or nothing is shown. If "none" is selected, <I> will not
be shown.
→ 2.16.1 [10-1] Main—SMDR Options—SMDR Options—Caller
ID Number & Name
Controls the display of secret dialing, when ARS dial above, is set
to show ARS-modified numbers. If enabled, numbers dialed
secretly will be shown as dots.
If ARS dial is set to show the user-dialed numbers, secretly dialed
numbers are always shown as dots in SMDR, regardless of this
setting.
→ 2.16.1 [10-1] Main—SMDR Options—SMDR Options—Secret
Dial
Controls the date format (MM-DD-YY, DD-MM-YY, YY-MM-DD, YY-
DD-MM)
→ 2.16.1 [10-1] Main—SMDR—SMDR Format—Date Format
Controls whether the time of receiving an incoming CO line call is
shown.
→ 2.16.1 [10-1] Main—SMDR Options—SMDR Options—
Condition Code "RC/VR" Print
Controls whether the time of answering an incoming CO line call is
shown.
→ 2.16.1 [10-1] Main—SMDR Options—SMDR Options—
Condition Code "AN/VA" Print
Controls whether Timed Reminder calls are shown. (→ 1.17.3
Timed Reminder)
→ 2.16.1 [10-1] Main—SMDR—SMDR for External Hotel
Application 1—Timed Reminder (Wake-up Call)
Specifies the messages that can be selected from an extension.
(→ 1.13.9 Printing Message)
→ 2.12.9 [6-8] Hotel—Main—SMDR for External Hotel Application
2—Printing Message 1–8
Controls whether time is displayed in 12-hour or 24-hour format.
→ 2.16.1 [10-1] Main—SMDR—SMDR Format—Time Format
(12H / 24H)
Description