Panasonic KX-TAW848 Feature Manual page 174

1.15 R
[Ring Tone Patterns]
1 280 ms
Single
Double
Triple
S-Double
*: The duration of a ring tone may vary by country/area.
[Ring Tone Pattern Table]
The ring tone pattern table is categorized into three parts, each containing a specified number of pattern
plans.
The ring tone pattern table is categorized as follows:
• Incoming CO Line Calls: each pattern plan can assign a ring tone pattern for each trunk group.
→ 2.8.14 [2-8-1] Ring Tone Patterns—Call from CO
• Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
→ 2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
• Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring
tones assigned to certain features (e.g., timed reminder).
→ 2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
The ring tone patterns that arrive at an extension are determined by the pattern plan that is assigned to that
extension through system programming.
[Programming Example of Ring Tone Pattern Table]
Intercom
Table
Call/Hold
No.
Recall
1 Double
2 Single
: :
Programming References
PC Programming Manual
2.8.14 [2-8-1] Ring Tone Patterns—Call from CO—Ring Tone Pattern Plan 1–8
2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone—Ring Tone Pattern Plan 1–8
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others—Extension—Ring Tone Pattern Plan 1–8
2.10.1 [4-1-1] Wired Extension—Extension Settings— Option 1—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Option 1—Ring Pattern Table
PT Programming Manual
None
174 Feature Manual
CO Line Call/Hold
Doorphone Call
Recall
TRG1 TRG2 ... Port 1
Single Single
Double Double
: : :
Timed
Reminder
Port 2 ...
: : : :
External
Call Back LCS
Sensor
: : :