Connecting System Settings - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Program 50 : Common Channel Interoffice Signaling Service
Level:
IN
Description
Use Program 50-02 : Connecting System Settings to define the settings for
each CCIS Route ID.
Input Data
Item
Item
No.
01
Port Number of Common
Signaling Channel (T1)
02
Common Signaling
Channel Data Speed
Assignment (T1)
03
Originating Point Code
04
Destination Point Code
(T1)
05
Calling Name Indication
(T1)
06
--- Not Used ---
2 - 544

50-02 : Connecting System Settings

CCIS Route ID
Description
Specify the Trunk port to send D-channel information.
This program is available for using DTI package.
Assign the baud rate of Common Signaling Channel
on DTI package.
Assign the Point Code of own side.
Assign the Point Code of destination side on the DTI
link.
Calling name indication does not send to destination
party if switch is turned to Disable.
Program 50 : Common Channel Interoffice Signaling Service
UNIVERGE SV8100
Route ID 1~8: CCIS via DTI
Route ID 9: CCIS via IAD/CD-PVAA (IP-CCIS)
Input Data
0~200
0 = 64Kbps
1 = 56Kbps
2 = 48Kbps(1)
3 = 48Kbps(2)
0~16367
0~16367
0 = Disable
1 = Enable
Default
0
1
0
0
1