NEC Univerge SV8100 Programming Manual page 39

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-03 : ETU Setup to setup and confirm the Basic Configuration data
for each blade. When changing a defined terminal type, first set the type to 0 and then
plug the new device in to have the system automatically define it or you may have to
reseat the blade.
Input Data
For CNF PKG Setup
Item
No.
01
For DLCA PKG Setup
Item
No.
01
Programming Manual
The items highlighted in gray
Physical Port Number
Item
Logical Port Number
Physical Port Number
Item
Terminal Type (B1)
10-03 : ETU Setup
are read only and cannot be changed.
Input Data
0~256
Input Data
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless Handset
6 = PGD(2)-U10 ADP (Paging)
7 = PGD(2)-U10 ADP (Tone Ringer)
8 = PGD(2)-U10 ADP (Door Box)
9 = PGD(2)-U10 ADP (ACI)
10 = DSS Console
11 = --- Not Used ---
Issue 1.0
01~16
Default
0
01~16
Default
0
2 - 5