Id Setup For Ip Trunk - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
Use Program 14-11 : ID Setup for IP Trunk to set the ID of each IP Trunk. This
program refers to incoming and outgoing IP Trunk calls. The ID is sent on an outgoing
IP Trunk call. This program is used only for H.323.
Input Data
Item
No.
01
Conditions
Feature Cross Reference
Programming Manual
Program 14 : Trunk, Basic Setup
Trunk Port Number
Item
IP Trunk ID
This Data is referred to at IP trunk outgoing call, or IP trunk incoming call.
This ID is notified at IP trunk outgoing call.
It is not notified when ID is 0.
Incoming Call arrives to the trunk port of the same ID as ID notified from the
partner system.
IP Trunk – H.323

14-11 : ID Setup for IP Trunk

001~200
Input Data
0~65535
(0 = No setting)
Issue 1.0
Default
0
2 - 149