NEC Univerge SV8100 Programming Manual page 506

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Item
No.
08
09
10
11
Conditions
None
Feature Cross Reference
2 - 472
Item
Dial Treatment
Select the Dial Treatment to be used for the table. If
a Dial Treatment is selected, Programs 44-05-02
and 44-05-03 are ignored and the Dial Treatment
defined in Program 26-03-01 is used instead.
Maximum Digit
Input the maximum number of digits to send when
using the F-Route.
CCIS over IP Destination Point Code
Input the Destination Point Code to send when using
this F-Route.
Network Specified Parameter Table
Enter a table number from Program 26-12.
Automatic Route Selection (ARS)
UNIVERGE SV8100
Input Data
0~15
0~24
0~16367
0~16
Program 44 : ARS/F-Route Setup
Default
0
0
0
0