NEC Univerge SV8100 Programming Manual page 264

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Item
No.
07
08
09
10
11
12
Conditions
None
Feature Cross Reference
2 - 230
External Paging
This option enables or disables a DISA or tie trunk caller ability to
use the telephone system External Paging.
Direct Trunk Access
This option enables or disables a DISA or tie trunk caller ability to
use Direct Trunk Access (Service Code
Forced Trunk Disconnect <Not for ISDN T-point>
This option enables or disables a tie trunk caller ability to use
Forced Trunk Disconnect (Service Code 3). This option is not
available to DISA callers.
Call Forward Setting by Remote via DISA
Enable or disable a DISA caller ability to use the Call Forward
service codes (Programs 11-11-01 ~ 11-11-05).
DISA/Tie Trunk Barge-In
This option enables or disables a DISA or tie trunk caller ability to
use the Barge-In feature.
Retrieve Park Hold
This option enables or disables a DISA or tie trunk caller ability to
retrieve a Park Hold call.
Class of Service
Direct Inward System Access (DISA)
Tie Lines
Item
#
9).
Program 20 : System Option Setup
UNIVERGE SV8100
Default
Input
Data
COS 1~15
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 1
1 = On