Using A Replacement Compactflash Card - Siemens SINAMICS G150 Operating Manual

11/03
11.7

Using a Replacement CompactFlash Card

Description
When you replace a flash card with a new card from Siemens, you have to activate
the cabinet settings before carrying out commissioning.
Procedure
• When you switch the system on for the first time, the message "Configuration?"
appears on the operator panel.
Confirm with "YES" (soft key).
• After initialization, the initial motor commissioning screen is displayed. Before
you start commissioning, however, you first have to load the cabinet factory
setting.
• Call up the main menu.
• Set the "Expert" access level.
• MENU – Parameterization – All Parameters
• p0009 = 30
• p0976 = 20, 21, or 22
380 V - 480 V, 110 kW - 250 kW: p0976 = 20
–
380 V - 480 V, 315 kW - 560 kW: p0976 = 21
–
660 V - 690 V, 75 kW - 800 kW: p0976 = 22
–
• When the parameter list is displayed again, the basic settings are loaded
(ignore any faults).
Switch on the power and start commissioning as normal.
SINAMICS G150
Operating Manual
Maintenance and Servicing
11-11