Storage; Double-Insulated Appliances - Toro 1800 Power Curve Operator's Manual

Hide thumbs Also See for 1800 Power Curve:
Table of Contents

Advertisement

4.
Install the new rotor by inserting the end of the rotor onto the fitted
end in the housing and rotating the rotor until it snaps into place
(Figure 17).
1. Fitted end of the rotor
Note: Ensure that the nut that secures the rotor pin remains inside
the recessed hole in the right inside wall of the housing.
Note: The housing will flex when you install the rotor.
5.
Tighten the bolt on the side of the housing.
6.
Install the right side plate with the screws that you removed in
step 1.
Service
Toro has designed this machine to give you years of trouble-free
use. Should it need service, bring the machine to an Authorized Toro
Service Dealer, who is specially trained to repair Toro products and will
ensure that your Toro stays "all" Toro.

Double-insulated Appliances

In a double-insulated appliance, two systems of insulation are
provided instead of grounding. No grounding means is provided on
a double-insulated appliance, nor should a means for grounding
be added to the appliance. Servicing a double-insulated appliance
requires extreme care and knowledge of the system, and should be
done only by the qualified service personnel at an Authorized Toro
Service Dealer. Replacement parts for a double-insulated appliance
must be identical to the parts they replace. A double-insulated
appliance is marked with the words "Double Insulation" or "Double
Insulated." The symbol (square within a square)
marked on the appliance.
Product Information
A model and serial number decal is located on the housing. Always
refer to specific numbers on the decal in correspondence or when you
need replacement parts.
Figure 17
may also be

Storage

1.
Run the machine for a few minutes and wipe away any melted
snow on the machine.
2.
Remove the key and disconnect the extension cord from the
machine.
3.
Examine the extension cord thoroughly for signs of wear or
damage. Replace it if it is worn or damaged.
4.
Examine the machine thoroughly for worn, loose, or damaged
parts. To repair or replace parts, contact an Authorized Service
Dealer for assistance.
5.
Store the extension cord with the machine.
6.
Store the machine in a clean, dry place.
9
Meijer.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

38381 1800 power curve38381

Table of Contents