Figure 2.2 On Position (Marked "|") Of The Main Line Switches On A 2U Power Distribution Unit; Figure 2.3 Off Position (Marked "¡") Of The Main Line Switches On A 1U Power Distribution Unit - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 2 Basic Operation
2.1 Powering On and Off
●
For 2U

Figure 2.2 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit

■
To Switch to OFF
Turn the main line switch of the power distribution unit to the OFF position (marked "¡").
This does not need to be turned off for normal operation. If the ETERNUS DX must be turned off, such as
before any inspections of power supply devices are performed, turn off the ETERNUS DX by using the pro-
cedure described in
the OFF position, and turn the main line switch to the OFF position.
●
For 1U
Figure 2.3 OFF Position (Marked "¡") of the Main Line Switches on a 1U Power Distribution Unit
Main line switch
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
Main line switch
"2.1.4 Powering Off" (page
44
Copyright 2014 FUJITSU LIMITED
49), turn all the PSU switches of the power supply unit to
P3AM-7662-04ENZ0