Fujitsu ETERNUS DX100 S3 Operation Manual page 64

Chapter 5 Expansion Functions
5.1 Installing Additional Drives
(2)
Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock
lever is still left open.
(3)
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
(4)
Check that the newly installed drive's DRIVE READY LED lights up green.
5
To install more additional drives, repeat
6
If a wrist strap is used, remove the wrist strap.
7
In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives
have been recognized.
8
Set up RAID groups, volumes, hot spares, and host affinity settings on the new drives, as required.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
Do
Hold the drive with both hands to protect against jarring.
•
Lock lever
Step 3 and Step
64
Copyright 2014 FUJITSU LIMITED
4.
P3AM-7662-04ENZ0