Figure 31 On Position (Marked "|") Of The Main Line Switches On A 2U Power Distribution Unit; Figure 32 On Position Of The Main Line Switches On A 2U Power Distribution Unit - Fujitsu ETERNUS AF250 S2 Basic Operation Manual

2. Basic Operation
Powering On and Off
●
For 2U

Figure 31 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit

Figure 32 ON Position of the Main Line Switches on a 2U Power Distribution Unit

Main line switch
■
To Switch to OFF
Turn the main line switch of the power distribution unit to the OFF position (marked "¡").
This does not need to be turned off for normal operation. If the ETERNUS AF must be turned off, such as be-
fore any inspections of power supply devices are performed, turn off the ETERNUS AF by using the procedure
described in "Powering Off" (page
tion, and turn the main line switch to the OFF position.
Main line switch
37), turn all the PSU switches of the power supply unit to the OFF posi-
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
31
P3AG-1842-06ENZ0