Fujitsu ETERNUS DX100 S3 Operation Manual page 68

Chapter 5 Expansion Functions
5.1 Installing Additional Drives
5
Pull the stopper catches on both sides of the high-density drive enclosure forward to unlock it.
Catch
6
Pull out the high-density drive enclosure from the rack until the lock clicks open.
7
Push the two catches on the top board in the direction of the arrows to unlock them.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
Do
Make sure that there are no cables that are caught or stuck on the rear of the
•
high-density drive enclosure when pulling it out. In addition, slowly pull out
the high-density drive enclosure to avoid exposing it to physical shocks.
Catch
68
Copyright 2014 FUJITSU LIMITED
P3AM-7662-04ENZ0