Chapter 2 Basic Operation; Powering On And Off; Switching On And Off The Main Line Switch On The Power Distribution Unit (For Regions Other Than Emea&I); Figure 2.1 On Position (Marked "|") Of The Main Line Switches On A 1U Power Distribution Unit - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 2
Basic Operation
This chapter explains how to turn on and off the ETERNUS DX and how to operate the FUNCTION button on
the controller enclosure.
2.1

Powering On and Off

This section explains how to turn on and off the ETERNUS DX.
2.1.1 Switching On and Off the Main Line Switch on the Power Distribution Unit (for
Regions Other than EMEA&I)
This section explains how to switch the main line switch of the power distribution unit to ON and OFF.
■
To Switch to ON
Turn the main line switch of the power distribution unit to the ON position (marked "|").
Make sure all of the main line switches are in the ON position.
●
For 1U

Figure 2.1 ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit

Main line switch
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
43
Copyright 2014 FUJITSU LIMITED
P3AM-7662-04ENZ0