Figure 1.37 Fan Expander Module; Table 1.12 Status And Meanings Of Each Led (Fan Expander Module) - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 1 Component Name/LED Name
1.3 High-density Drive Enclosure
LED name
IDENTIFY
FAULT
■
Fan Expander Module
An Fan Expander Module is a cooling fan module.
Figure 1.37 shows the fan expander module.

Figure 1.37 Fan Expander Module

1. READY LED
2. FAULT LED
3. IDENTIFY LED
The LEDs turn on or blink to indicate the statuses that are listed below.

Table 1.12 Status and Meanings of Each LED (Fan Expander Module)

LED name
READY
FAULT
IDENTIFY
■
Power Supply Unit
The power supply unit transforms input AC power from a power socket to DC power and supplies power to
each component.
Each power supply unit contains fans.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
LED status Meanings
The installation location of the I/O module is identified according
(blinks blue)
to the instruction that is issued from ETERNUS Web GUI or ETER-
NUS CLI.
The I/O module is in error status.
(amber)
Table 1.12
1 2 3
LED status Meanings
The fan expander module is in normal status.
(green)
The fan expander module is in error status.
(amber)
The installation location of the fan expander module is identified
(blinks blue)
according to the instruction that is issued from ETERNUS Web GUI
or ETERNUS CLI.
39
Copyright 2014 FUJITSU LIMITED
shows the status and meanings of each LED.
P3AM-7662-04ENZ0