Group Database Menu; Endpoint Database Menu - GE MDS entraNET 900 Technical Manual

05-4055A01, Rev. E

Group Database Menu

The Group Database Menu
with this AP that belong to the specified Group ID.
Figure 3-38. Group Database Menu
• —Allows the selection of a particular group and displays the
Group ID
remote radios defined for the group.
• —The unit ID of the associated remote.
UnitID
• —The ID number of the group.
GroupID
• —The COM port that the remote uses to pass the serial
Com Port
multicast traffic associated with this Group ID.

Endpoint Database Menu

The Endpoint Database Menu
non-entraNET Ethernet devices that are known to the transceiver; this is
similar to the AP table of IP devices. The list shows endpoint MAC and
IP addresses, as well as packet exchange data.
NOTE: A Remote does not have an IP address; rather, it acts as a
transparent bridge for IP traffic to the connected Ethernet
endpoint.
MDS entraNET Technical Manual
(Figure 3-38) shows the remotes associated
Invisible place holder
[0-15; 0]
(Figure 3-39 on Page 76) shows all
75