Table of Contents
Advertisement
● A click stop is provided for each bounce
angle.
● Hold the bounce lock release button and tilt
the flash head downward when you set the
bounce angle at -10° .
● When using bounce flash, (
played on the LCD panel.
● The effective flash range will blink only
when the bounce angle is set at -10° .
● It is recommended to set the bounce angle
at -10°to prevent uneven exposure when
the distance to the subject is within 1m.
P-TTL Auto Flash Photography
The amount of reflective light will change accord-
ing to the condition of the reflective surface, angle,
and distance. Confirm the flash status indicator in
the viewfinder or the auto check display in the LCD
panel when taking
pictures.
52
Manual Flash Photography
The amount of light during bounce flash photogra-
phy is greatly affected by the condition of the
reflective surface, therefore test pictures should be
taken beforehand or changing the exposure and
) will be dis
taking several pictures may be recommended.
● When taking color photographs, if the reflec
● Bounce flash photography is greatly affect
tive surface for the bounce flash is colored,
the picture will be affected by the color and
unless this is intentional, a white surface
hould be used.
ed by the surrounding conditions.
A photography manual and other references
are recommended.
Advertisement
Table of Contents
