Samsung SEF-54PZF User Manual page 42

When Using Both an SEF-54PZF Attached to the Camera and a Separated Flash Unit as Main Flashes
Use both flash units as main flashes
(Preparation of Flash Unit Attached to Camera)
1
Firstly, set the wireless mode and channel of
the flash unit attached to the camera, and reg-
ister them on the camera.
① Attach the SEF-54PZF to the hot shoe of
the camera after turning the camera off.
42
카메라 측의 플래시
② Set the power switch of the flash unit to
(WIRELESS).
③ Press the wireless mode button (M/C/S) the
number of times required to display MAS
TER on the LCD panel.
④ Slide down the setting switch to the (yellow
dot) to display the channel on the LCD
panel.
⑤ Press the channel button (CH) and select a
channel from 1CH to 4CH.