Table of Contents
Advertisement
■ Contrast Control Sync Flash
Refer to page 31 for the features and conditions of
use of this sync mode.
●Refer to page 38-47 on using the SEF-54PZF
detached from the camera.
Procedure
1
Turn on the power switch.
2
Set the sync mode switch to contrast-control
(
)
3
Set the zoom position. (The setting method
differs according to your camera and lens.
Refer to page 22.)
●If the SEF-54PZF is much closer to the sub-
ject than the flash unit to be used in combi-
nation, use (M.Zoom) to set the zoom posi-
tion to a shorter lens focal length.
4
Turn on the flash units to be used in combina-
tion.
●If the camera's built-in flash unit is part of
the combination, pop up the built-in flash.
5
Confirm that the subject is within the effective
flash range and the ready lamp is lit.
Then take a picture.
35
Advertisement
Table of Contents
